Emotiva XPA-200

Brand: Emotiva
Product Code: XPA200
Availability: 1
Price:
₹48,000.00

Ex Tax: ₹48,000.00
Qty: - +
   - OR -   
What do you do when you want the incredible sound quality and features of the legendary XPA-2, but you don’t need quite as much power? We have the perfect choice, the all-new XPA-200. Equally at home powering a superb stereo system or the front channels of an audiophile surround sound system, the XPA-200 delivers 150 watts per channel into 8 ohms, or 240 watts per channel into 4 ohms of powerful, clean, audiophile grade audio power. The highly refined amplifier circuitry in the XPA-200 handles subtle details with finesse, while the hefty power supply provides plenty of dynamic power reserves for demanding source material.
Inside, the XPA-200 boasts the advanced engineering, high quality components, a heavy-duty toroidal transformer power supply, and our classic short signal path Class A/B technology. Also on tap is the transparent yet comprehensive protection circuitry you’ve come to expect from Emotiva. The new Gen2 version has also been upgraded with our new custom low-ESR power supply filter capacitors for even more stunning dynamics. Outside, you get Emotiva’s elegant new Gen2 styling, solid machined brass gold plated RCA jacks, and full-sized five-way binding posts. All the greatness of XPA, just smaller.
 
The XPA-200, enjoy your journey.
 
  • Topology: Fully discrete, dual differential, high current, short signal path Class A/B.
  • Number of Channels: 2
  • Power Output 
    (rated power; THD < 1%):
    150 watts / channel; into 8 Ohms; both channels driven.
    240 watts / channel; into 4 ohms both channels driven).
  • Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.045 dB.
  • Minimum Recommended Load Impedance (each channel): 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel).
  • Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1 dB).
  • THD + noise: < 0.02%
  • Signal to Noise Ratio (8 Ohm load): 
    > 89 dB at 1 watt (A-weighted).
    > 110 dB at rated power (A-weighted).
  • Damping Factor (8 Ohm load): > 500
  • Speaker Output Connections: 
    Full-sized 5-way binding posts; one pair per channel x 2.
  • Power Supply: 
    90,000 uF of low-ESR storage capacitance.
    360 VA heavy duty toroidal transformer.
  • Input sensitivity (for rated power; 8 Ohm load): 1100 mV
  • Gain: 29 dB
  • Input Connections: Unbalanced (RCA), Balanced (XLR); one each per channel.
  • Input Impedance: 47 kOhms
  • Trigger: 
    Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
    Trigger Output: 12 VDC; can drive any load up to 50 mA.
  • Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
  • Front Panel Controls and Indicators: 
    Standby; push button (changes color to indicate Standby or On).
    Status LEDs (one per channel); illuminate blue for normal operation or red to indicate a fault (may be disabled by rear panel Status LED switch).
  • Rear Panel Controls: 
    AC Power switch; rocker switch (switches AC mains power).
    Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs and dims Standby button halo lighting).
    Input selector; toggle switch (selects between balanced and unbalanced inputs).
  • Protection: The XPA-200 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
  • Size: 
    unboxed: 17" wide x 3.875" high x 19" deep
    boxed: 21 3/4" wide x 8 1/2" high x 22 1/4" deep
  • Weight: 31 lbs (37 lbs boxed)

 

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: