Emotiva XPA-100

Brand: Emotiva
Product Code: XPA100
Availability: 1

Ex Tax: ₹38,000.00
Qty: - +
   - OR -   

You know that in your heart of hearts, you’ve always wanted to use monoblock amplifiers for the ultimate in performance, channel separation and… well… let’s just admit it… bragging rights!

The new XPA-100 is the perfect choice as the foundation of a truly superb audiophile stereo or multi-channel sound system. Each XPA-100 incorporates one amazingly powerful, dynamic, clean sounding X Series amplifier module. With 250 watts @ 8 ohms and 400 watts @ 4 ohms on tap, sonic nirvana is just the twist of a knob away! Use two for stereo, or four for stereo bi-amping. How about a set of five or seven for breathtaking surround? Because each channel is powered by its own completely isolated amplifier, the slightest hint of interaction between channels is completely eliminated, thereby providing the best possible separation and absolute clarity of sound. Believe us when we tell you that the improvement in detail and dimensionality is palpable.

If you’re looking for the ultimate in audiophile amplification, then you need a set of XPA-100s.

Under the hood, the XPA-100 includes all the advanced engineering, high quality components, and attention to detail you expect from Emotiva – including our proven short signal path Class A/B topology, a heavy duty toroidal transformer power supply, and transparent yet comprehensive protection circuitry. The new Gen2 version has also been upgraded with our new custom low-ESR power supply filter capacitors for even more stunning dynamics. Outside, it boasts Emotiva’s elegant new Gen2 styling, a solid brass gold-plated machined RCA jack, and two pairs of full-sized, five-way binding posts to facilitate bi-wiring. To complete the picture, the XPA-100’s low profile 2RU chassis and efficient, cool operation let you fit a full set into a single equipment rack.

  • A true audiophile-quality monoblock amplifier.
  • Fully discrete, dual differential, high current, short signal path Class A/B topology.
  • Top quality parts and construction.
  • Real power easily drives complex loads.
  • Heavy duty power supply with oversized toroidal transformer and low-ESR capacitors.
  • Full-sized five-way binding post speaker terminals.
  • Balanced and unbalanced inputs.
  • Solid machined gold-plated RCA input connector.
  • Elegant new Emotiva Gen2 styling with rugged solid steel chassis.
  • 15mm solid milled aluminum faceplate.
  • Low profile 2RU chassis lets you fit five XPA-100s in a single rack.
  • Remote trigger input and output.
  • 115 VAC or 230 VAC with automatic detection and switching.
  • Totally transparent protection circuitry – protects you from all common fault conditions.
  • Topology: Fully discrete, dual differential, high current, short signal path Class A/B.
  • Number of Channels: 1
  • Power Output
    (rated power; THD < 1%): 
    250 watts (1 channel) into 8 Ohms.
    400 watts (1 channel) into 4 Ohms.
  • Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.07 dB
  • Minimum Recommended Load Impedance (each channel): 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel).
  • Frequency Response: 10 Hz to 80 kHz (+ 0 / - 1 dB).
  • THD + noise: < 0.02%
  • Signal to Noise Ratio (8 Ohm load): 
    > 89 dB at 1 watt (A-weighted).
    > 112 dB at rated power (A-weighted).
  • Damping Factor (8 Ohm load): > 500
  • Speaker Output Connections: 
    Full-sized 5-way binding posts; two pair per channel x 1.
  • Power Supply: 
    60,000 uF of low-ESR storage capacitance.
    360 VA heavy duty toroidal transformer.
  • Input sensitivity (for rated power; 8 Ohm load): 1200 mV
  • Gain: 29 dB
  • Input Connections: Unbalanced (RCA), balanced (XLR).
  • Input Impedance: 47 kOhms
  • Trigger: 
    Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
    Trigger Output: 12 VDC; can drive any load up to 50 mA.
  • Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
  • Front Panel Controls and Indicators: 
    Standby; push button (halo ring changes color to indicate Standby or On).
    Status LEDs (two); blue LED illuminates for normal operation, red LED flashes during power-on or when a fault occurs; (may be disabled by rear panel Status LED switch).
  • Rear Panel Controls: 
    AC Power switch; rocker switch (switches AC mains power).
    Status LEDs switch; small slide switch on left rear (disables front panel Status LEDs and dims Standby button halo lighting).
    Input selector; toggle switch (selects between balanced and unbalanced inputs).
  • Protection: The XPA-100 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
  • Size: 
    unboxed: 17" wide x 3.875" high x 19" deep.
    boxed: 22 1/4" wide x 8 1/2" high x 21 3/4" deep.
  • Weight: 27 lbs (33 lbs boxed)­.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: