Emotiva BasX A-150 Stereo Power Amplifier

• Power Output (both channels driven):
  75 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms.
  150 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms.

• Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB)

• Broad Band Frequency Response: 5 Hz to 80 kHz +0/-1.8 dB

• THD + noise: < 0.02% (A-weighted); ref rated power

• Signal to Noise Ratio (8 Ohm load):
  > 120 dB; ref rated power; (A-weighted).
  > 100 dB; ref 1 watt; (A-weighted).

• Minimum Recommended Load Impedance (per channel): 4 Ohms
  (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

• Damping Factor (8 Ohm load): > 500.

• Input Sensitivity (for rated power; 8 Ohm load): 1.2 V.

• Gain: 29 dB.

• Input Impedance: 27 kOhms

• Input Connections: Unbalanced (RCA); one each per channel.

• Speaker Output Connections: Audiophile grade 5-way binding posts.

• Trigger:
  Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
  Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements:

• 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).

• Standby: push button (halo ring changes color to indicate Standby or On).

• Status LEDs: one per channel; blue.
  Status LEDs change to red to indicate a fault condition.

• AC Power switch: rocker switch (switches AC main power).

• Status LEDs switch: disables front panel Status LEDs.